Go to the previous, next section.

Using ILU with Python

Introduction

This document is for the Python programmer who wishes to use ILU. The following sections will show how ILU is mapped into Python constructs and how both Python clients and servers are generated and built.

The ISL Mapping to Python

Names

In general, ILU constructs Python symbols from ISL names by replacing hyphens with underscores. For example, an ISL object type T-1 would correspond to the Python class T_1. Any place an ISL name appears as part or all of a Python identifier, this translation occurs.

Interface

Each ISL interface I generates two Python modules: one named I containing common definitions, and another named I__skel containing skeletons (server stubs). For example, INTERFACE map-test; generates the Python modules map_test and map_test__skel, contained in the files `map_test.py' and `map_test__skel.py', respectively.

Basic Types

The basic ISL types have the following mapping to Python types:

BYTE, BOOLEAN, SHORT CHARACTER, CHARACTER, SHORT INTEGER, INTEGER, and SHORT CARDINAL all map to Python int.
LONG INTEGER, CARDINAL, and LONG CARDINAL all map to Python long int.
SHORT REAL and REAL map to Python float.
LONG REAL maps to the Python type ilu_longreal, a type implemented by the ILU Python runtime. This type has limited functionality, but can be passed around without loss of precision, converted to float or int, and compared. A value of this type may be constructed by calling ilu.LongReal().

Constant

ISL constants translate to Python variables initialized to the specified value. For example,

CONSTANT pi : real = 3.14159265358979323846;

maps to

pi = 3.14159265358979323846e0

Strings

An ISL SEQUENCE OF SHORT CHARACTER maps into a Python string. SEQUENCE OF BYTE is also mapped into a Python string.

Pickles and Typecodes

A value corresponding to the ISL type PICKLE is an instance of the Python class ilu.Pickle. Instances of this class have the following methods:

typecode() - returns the typecode of the pickle's value as a string.
value() - returns the Python form of the value in the pickle.
bytes() - the pickled bytes of the pickled value as a string.

The constructor for this class takes two arguments, typecode and value, and returns a new pickle containing the value specified by value of the ISL type specified by typecode. Pickles may also be created by calling the constructor with a single argument string, which must be the result of an earlier call on the bytes() method of another pickle instance.

Typecodes are represented by the Python class ilu.Typecode. Typecodes are constructed with a single string argument, of the form 'interface.type', where interface is the ISL name for the interface, and type is the ISL name for the type. Instances of the Typecode class support the method

id() - return the ILU type ID (CORBA repository ID) for the typecode's type.
name() - return the ISL name of the typecode's type.

Constructed Types

Enumeration

Enumerations are mapped to a method-less class object which contains an attribute of the correct type and value for each value in the enumeration. The class also contains a dictionary, called "__image__", for each enumeration type that maps an enumeration value to a string corresponding to its Python enumeration value name.

For example,

TYPE color = ENUMERATION red, dark-blue END;

maps to

class color:
    red = 0;
    dark_blue = 1;
    __image__ = {
       red: 'red',
       dark_blue: 'dark_blue'};

Array

An ISL array maps into a Python list with the specified number of elements. Tuples as well as lists are accepted as input, but lists are always produced as output from ILU. Arrays of BYTE or SHORT CHARACTER are represented with Python strings.

Sequence

An ISL sequence of short character maps into a Python string.

All other ISL sequence types map into Python lists. Tuples as well as lists are accepted as input, but lists are always produced as output from ILU. Sequences of BYTE or SHORT CHARACTER are represented as Python strings.

Record

ISL records map into generated Python classes with the same name, with the record's field names as attributes. The name of the record becomes a constructor function which accepts exactly the same number of arguments as the record has fields, in the same order.

For example, a record value of the ISL type

TYPE segment = RECORD left-limit : integer, right-limit : integer END;

with a left-limit of -3 and a right-limit of 7 would map to

segment(-3, 7) => <segment:{'left-limit' : -3, 'right-limit' : 7}>

Union

An ISL union maps into a Python tuple with two components: an integer discriminator, and the discriminated value. There are three possibilities:

If the discriminator matches one of the union case values of an arm, the second component is of the type specified by that arm.
If the discriminator matches no union case values and there is a default arm, the second component is of the type specified by the default arm.
If the discriminator matches no union case values and there is no default arm but the union has the OTHERS attribute, the second component is None.

Optional

A value corresponding to the ISL type OPTIONAL T may be None (indicating the null case) in addition to the values of the type T.

Object Types

Each ISL object type is mapped into a Python class. These classes have the methods specified in the ISL, as well as some built-ins.

Surrogate and True Object Types

All surrogate object types inherit from iluRt.IluObjSurr, which in turn inherits from iluRt.IluObject. True object types inherit from IluRt.IluObjTrue, which also inherits from iluRt.IluObject. The method IluTrueP() will return a true value on true instances, and a false value on surrogate instances. The string binding handle of an object instance can be retrieved with the method IluSBH(). The object-id of an instance can be retrieved with IluObjectID(); it returns a tuple containing a string server ID and a string instance-handle. If support for the CORBA IIOP is configured into your ILU build, the string IOR of an instance can be retrieved by calling the function ilu.IOROfObject(), passing the instance as the argument. The type name of the most specific type of an instance can be retrieved with the method IluTypeName(); the unique ID of that type can be retrieve with the method IluTypeID().

Object types which inherit from the ISL type ilu.CORBA-Object (which include all object types defined with OMG IDL), will inherit from the Python class ilu.CORBA_Object, which is the same as the class CORBA.Object.

Methods, Parameters, and Exceptions

ISL methods of an object type map to Python methods of the corresponding class. IN and INOUT parameters appear in the Python method signature in the same order as they do in ISL.

Let us define a result value to be either a return value (corresponding to a method's return type) or an INOUT or OUT parameter. Result values are returned by the Python method as a tuple, with the return value (if present) appearing before any parameters. If the method has only one result value, then it is simply returned (i.e., a tuple of length one is not constructed to hold this value). If the method has no result values, then None is returned.

An ISL exception translates to a Python variable initialized with a string representing the exception. These variables are used in Python raise statements in object implementation code, and in try ... except statements in client code. For example, the declaration

EXCEPTION division-by-zero;

in the interface map-test maps to the following statement in `map_test.py':

division = 'map-test: division-by-zero'

ASYNCHRONOUS methods have no return values and raise no user-specified exceptions. They may return before the completion of the true method. FUNCTIONAL methods that have no parameters are cached so that a surrogate address space makes only one call to the true address space to retrieve the return value.

Garbage Collection and COLLECTIBLE

All instances of ILU object types are covered by the normal Python garbage collection; i.e., the application program must maintain a reference to the instance, or it will be garbage collected. With true instances of COLLECTIBLE object types, the ILU kernel will maintain an additional reference to the instance as long as it has registered clients using that instance.

Access to standard ILU features

Servers and Ports

Each object exported by an implementation must belong to a true server, an instance of the Python type ilu_Server which is implemented by the ILU runtime. An ilu_Server can be created by calling the function ilu.CreateServer([serverID [, transport [, protocol [, objectTable]]]]), which returns a value of type ilu_Server. If serverID is a string, it specifies the server ID; if it is None, one will be invented automatically. The transport argument is either a sequence of strings, chosen to be compatible with the protocol, or None to let it default. The protocol argument is either a string specifying a particular RPC protocol, or None to choose the default. Additional ports can be added to a server with the addPort() method, if an application needs to make it available with via multiple protocols or addresses.

The first time a true server is created, it becomes the default server. The default server is used for an exported object if a server is not otherwise specified. If an object is exported before any servers have been created, one will be created automatically using default parameters and a message to that effect will be written to stderr.

An object of type ilu_Server has the following methods:

id() - returns the ILU server ID of the server.
addPort(TINFO, PINFO) - adds another port to the server with the specified TINFO and PINFO.
createSerializer() - creates and returns a serialization context.

Object Tables

The objectTable argument allows specification of a callback function for creating true instances on demand. The callback function should take one argument, a string, which is the object ID of the instance to be created, and return a true instance.

Threading and Event Loops

To use threads, you must have configured both ILU and Python with thread support when building them. If you have done this, your ILU/Python runtime support will be thread-capable. To have ILU begin using threads, place a call to the function ilu.ThreadedOperation() in your Python program before any other ILU calls are made.

Animating Servers

Running the ILU main loop by calling ilu.RunMainLoop() brings the true servers to life. This function does not return until ilu.ExitMainLoop() is called. If you are using ILU with Tkinter, run the main loop by calling ilu_tk.RunMainLoop(), rather than using either the ILU or Tkinter main loops. ilu_tk.RunMainLoop sets things up so that both Tk and ILU events are handled.

Using Alarms

In order to schedule a Python function to be called at a certain time in the future when executing the ILU main loop, an ilu_Alarm may be used. Objects of this type are created by calling ilu.CreateAlarm(). An ilu_Alarm must be set to have any effect.

The alarm's method set(time, proc, args) is used to set the alarm. The int, float, or ilu_FineTime time argument is the time at which the alarm will fire; the proc argument is the Python function that will be called when the alarm fires; and the args argument is a tuple of arguments to be passed to proc. The tuple args must match proc's signature. For example, if proc is declared def P(a, b): then args must be a two-tuple. Likewise, if proc takes only one argument then args must be a one-tuple, or if no arguments then a zero-tuple.

The function ilu.FineTime_Now() may be called to obtain ILU's idea of the current time. A value sec of type int or float in units of seconds may be converted to type ilu_FineTime by calling ilu.FineTime(sec). Values of type ilu_FineTime may be compared, added, and subtracted. These operations may be used to construct values representing any relative time (subject to precision and range limitations), which is what is needed by an alarm's set method.

The alarm may be set multiple times with different arguments, in which case the parameters of the most recent call to set are in effect. Thus, once an alarm fires, it may be reused by calling set again.

An alarm may be unset by calling its method unset().

Custom Records

ILU generally supports a facility named custom records. This means that an application can declare that the language-specific mapping of a particular record type ISL(A) to lang(A) is to be overridden, and that instead a specific type X will be used in this language to represent values of ISL(A). In Python, this is done by simply replacing the generated class definition with a different class definition.

For example, suppose we had the ISL record type

INTERFACE Ifc;
  ...
TYPE Foo = RECORD color : RGB-tuple, position : XY-pair END;

The normal mapping of Ifc.Foo to Python would be to a class called Foo with the following definition:

class Foo (iluRt.IluRecord):
    __ilu_type_name__ = 'Ifc.Foo'
    def __init__(self, _color, _position)
        self.color = _color;
        self.position = _position;

    def __getinitargs__(self):
      return (self.color, self.position)

To override this, define a new class in your application that has matching signatures for __init__ and __getinitargs__, and a matching value for __ilu_type_name__. It must also inherit from IluRt.IluRecord. Then assign the class object for this new class to the symbol Foo in the Python module Ifc. So:

class MyFoo (iluRt.IluRecord):
    __ilu_type_name__ = 'Ifc.Foo'
    def __init__(self, _color, _position):
        self.color = _color
        self.position = _position
        self.some_other_attr = whatever_I_want
        call_some_other_code(self)

    def __getinitargs__(self):
        return self.color, self.position

    ...possible other methods...

Ifc.Foo = MyFoo

String Binding Handle Formation

To use object tables properly, it is usually necessary for a client program to create a surrogate instance for which the true instance does not yet exist. In Python, this is done by creating a string binding handle for the object, then calling ilu.ObjectOfSBH() on that SBH. String binding handles may be formed by calling the function ilu.FormSBH().

Simple Binding

A true instance may be published with the simple binding service by calling its method IluPublish(). A true instance may be unpublished by calling its method IluWithdraw().

A published ILU object may be obtained by calling ilu.LookupObject(sid, ih, cl), where sid is object's server's server ID, ih is the object's instance handle, and cl is its class.

Principal Identities and Passports

An ILU passport (see section Security) is represented in Python by an instance of the ilu_Passport object type. Instances of this type can be obtained by calling ilu.CreatePassport(). Please see the documentation of that function for more information on the abilities of this object type.

The passport of the caller may be obtained in the true method by calling the ILU runtime routine ilu.CallerIdentity(). The `native' passport may be obtained by calling ilu.GetPassport(). In the case of a local call, these two passports may be the same object. Passports are thread-local; that is, an application may use a different passport in each thread.

Building Python/ILU Applications

Stub Generation

To generate Python stubs from an ISL file, use the program python-stubber. Two files are generated from each ISL INTERFACE name:

`name.py' containing code for constants, exceptions, and types defined in the interface, and
`name__skel.py' containing code for the skeletons (server stubs) for object types defined in the interface.

Alternatively, for surrogate-side use the stubber can be run automatically by a hook in the ilu module. Calling ilu.AutoImport() will establish the stubber as part of the normal Python import machinery, and will cause `.isl' and `.idl' files in directories on your ILUPATH environment variable path to be automatically stubbed and loaded.

Implementing an ILU module in Python

A Python module that implements ILU objects of types defined in INTERFACE I also imports from I__skel. This gives access to the skeleton classes from which implementation classes inherit.

Implementation Inheritance

An implementation of object type T from interface I needs to inherit from the class I__skel.T. If there is inheritance in the ISL, and an implementation of a subtype wants to inherit from an implementation of a supertype, the skeleton class must be appear in the list of base types before the implementation class.

For example, objects for the ISL

INTERFACE j;

TYPE c1 = OBJECT METHODS one() END;
TYPE c2 = OBJECT METHODS two() END;
TYPE c3 = OBJECT SUPERTYPES c1, c2 END METHODS three() END;

could be implemented in Python by

import ilu, j, j__skel

class c1(j__skel.c1):
    def one(self):
        ...

class c2(j__skel.c2):
    def two(self):
        ...

class c3(j__skel.c3, c1, c2):
    def three(self):
        ...

In this case c3's method one is implemented by c1.one and c3's method two is implemented by c2.two.

Exporting Objects

An object can be exported in one of three ways:

The object's string binding handle may be obtained by calling its method IluSBH() and communicating this somehow to a client, who then turns the handle back into an object by calling ilu.ObjectOfSBH(cl, sbh).
The object may be published using the simple binding service by calling its method IluPublish(). In order for this to be effective, the object must have a well-known object ID, or the object ID must be communicated to clients, so clients can know what to pass to ilu.LookupObject. The object ID is a function of the object's instance handle and its server's server ID.
The object may be returned by a method or passed back in a method's INOUT or OUT parameter.

An object's instance handle can be controlled by setting the instance variable IluInstHandle before the object is first exported. If this instance variable is not set, and instance handle will be invented automatically.

An object's server can be controlled by setting the instance or class variable IluServer to a value of type ilu_Server. The value of this variable at the time an object is first exported will be used as the server for that object. If such a variable is not set, the default server is used.

Using an ILU module in Python

The ILU runtime interface is in the Python module ilu. Python definitions for ISL INTERFACE I are in the Python module I. As with any other modules in Python, these modules are imported using the import statement.

A client program may create an ILU object in one of three ways:

Knowing the string binding handle sbh and class cl of an object, call ilu.ObjectOfSBH(cl, sbh) which returns an instance of that class. For example, to obtain an instance of ISL type square from INTERFACE shapes whose string binding handle is sbh, one would call ilu.ObjectOfSBH(shapes.square, sbh).
Knowing the object ID (sid, ih) and class cl of an object that has been published using the simple binding service, call ilu.LookupObject(sid, ih, cl) which returns an instance of that class (or None if the lookup fails).
Receive an instance as a result value from a method call that returns an object type or has an object type as an INOUT or OUT parameter.

CORBA Support in Python

This release of ILU has several nods to an eventual CORBA mapping for the Python language. The Python CORBA module contains support for the classes CORBA::ORB and CORBA::Object, and the CORBA::ORB_init() function. See the Python/ILU API Reference for more information on these.

Python/ILU API Reference

Identifiers Exported From Module `ilu`

Function: AutoImport ([path=() [verbose=0]])

If called, enables the auto-loading of `.isl' and, if OMG IDL support is configured into ILU, `.idl', files that are on the user's ILUPATH environment variable. The python-stubber program is run to generate the Python surrogate stubs for the interface description into a temporary directory, and those stubs are loaded into the current program. The stubber is re-run every time the interface is imported. If an error occurs while producing the Python stubs, an exception is raised and the import process stops. The path parameter has no effect; the verbose parameter will cause various messages to be written to the standard output during the process of importing, if set to a non-false value.

Function: CallerIdentity ()

Returns the passport containing identities of the caller. This routine is only valid inside the code of a true method.

Function: CreateAlarm ()

Creates an object of type ilu_Alarm.

Function: CreateLoopHandle ()

Creates and returns an instance of a "loop handle" object, which can be passed to ilu.RunMainLoop and ilu.ExitMainLoop().

Function: CreatePassport ()

Creates and returns an empty instance of a ilu_Passport object. The ilu_Passport object is used to provide a sense of identity in the ILU system. It can hold any number of different identities, each of which is represented with an appropriate data structure that varies from identity type to identity type.

The ilu_Passport object type has the following methods:

lookupIdentity (IDENTITY-TYPE-NAME) - returns the data structure for the specified identity, if the passport contains one; Returns None otherwise. Raises ilu.IluGeneralError if the named identity type does not exist. The identity type 'ConnectionIdentity' is always supported; the identity type 'SunRPCAuthUnixIdentity' will be supported if support for the sunrpc protocol has been configured into ILU.
addSunRPCAuthUnix (HOSTNAME, UID, GID, TUPLE-OF-GROUPS) - adds an identity of type 'SunRPCAuthUnixIdentity' to the passport with the specified HOSTNAME, UID, GID, and TUPLE-OF-GROUPS. See Appendix A of RFC 1831 at http://info.internet.isi.edu:80/in-notes/rfc/files/rfc1831.txt for details on the meaning of these parameters. This method will only be available if support for the sunrpc protocol has been configured into ILU.

Function: CreatePipeline ()

Creates and returns an empty instance of a ilu_Pipeline object. The ilu_Pipeline object is used to allow multiple requests to be outstanding on non-concurrent protocol streams. The ilu_Pipeline object has no methods.

Function: CreateServer ( [serverID [transport [protocol [objtable]]]] )

Used to create an ilu_Server object with the specified serverID, transport, and protocol. If serverID is unspecified or None, an identifier will be invented automatically. If transport or protocol are unspecified or None, they will default to ('sunrpcrm', 'tcp_0_0') and 'sunrpc', respectively. (Other combinations that would work are transport of ('tcp_0_0') and protocol of 'iiop_1_0_1', transport of ('sunrpcrm', 'tcp_0_0') and protocol of 'courier', and transport of ('tcp_0_0') and protocol of 'http', depending on the configuration of your ILU system.) The first time CreateServer is called, the server so created becomes the default server. If there is no default server when one is required, one will be created using default parameters and a message will be issued on stderr. The objtable argument allows specification of a callback function for creating true instances on demand. The callback function should take one argument, a string, which is the object ID of the instance to be created, and return a true instance.

An ilu_Server object has the following methods:

id () - returns the string identifier of that server.
addPort (TRANSPORT, PROTOCOL) - adds a port with the specified TRANSPORT and PROTOCOL (described above) to the server instance.
createSerializer() - creates and returns a new serialization context object.

Function: DefaultServer ()

Returns the default server.

Function: DoSoon (FUNCTION, ARGS-TUPLE, STRING-DESCRIPTION)

Causes the function FUNCTION to be run with args ARGS-TUPLE to be run at some point in the future, when the system finds it to be convenient. In the threaded world, a new thread is forked to run the function; in the non-threaded world, the function is executed at some point by the event loop as a background task.

Function: ExitMainLoop (loophandle)

Exits the ILU main loop, assuming it is running. The loophandle is created by a call to ilu.CreateLoopHandle(), and must have been previously used as an argument to a call to ilu.RunMainLoop().

Constant: FALSE

A value which evaluates to Python boolean False.

Function: FineTime (seconds)

Converts its int or float argument seconds in units of seconds to type ilu_FineTime. Objects of this type can be compared, added, subtracted, and converted to int or float. The main use of objects of this type is in setting alarms.

Function: FormSBH (sid, ih, type, pinfo, tinfo_vec)

Forms a valid ILU string binding handle from the arguments and returns it. The sid and ih arguments are strings containing the server ID and instance handle for the desired instance. The type argument should be the Python class for the most specific object type of the desired object. The pinfo argument is a tuple containing the protocol information describing the object implementation's preferred communication protocol. The tinfo_vec argument is a tuple of tuples, specifying the transport stack needed to connect to the implementation. Each sub-tuple in the tinfo_vec is a tuple describing a particular transport layer.

For instance, to create a string binding handle for an instance of type Foo.Bar, with server id "some-server-id" and instance handle "some-instance-handle", exported via Sun RPC, version 2, with program number 1000007, version 3, via TCP/IP from host "foobar.somewhere.com", port 3456, we'd say
sbh = ilu.FormSBH('some-server-id', 'some-instance-handle', Foo.Bar, ('sunrpc_2', 1000007, 3), (('sunrpcrm',), ('tcp', 'foobar.somewhere.com', 3456)))
Note the comma used after 'sunrpcrm' to create a true tuple; note also that use of this procedure requires some specialized knowledge, such as knowing that use of Sun RPC also requires use of the Sun RPC record-marking transport layer when used over TCP/IP.

Constant: FineTimeRate

The precision of type ilu_FineTime in seconds is the reciprocal of this constant.

Function: FineTime_Now ()

Returns the current time as an ilu_FineTime object.

Function: FormSBH (objectID, contactInfo)

Returns the string binding handle corresponding to the object id objectID and contact info contactInfo. This is the inverse of ParseSBH.

Function: GetPassport ()

Returns the current passport for this thread. See also CreatePassport() and SetPassport().

Function: GetPipeline ()

Returns the current pipeline context for this thread. See also CreatePipeline() and SetPipeline().

Function: GetSerializer ()

Returns the current serialization context for this thread. See also the createSerializer() method on the ilu_Server class, and the SetSerializer() function.

Exception: IluGeneralError

An exception that may be returned from the ILU runtime. This exception is used to return all `standard' exceptions, with a string value to indicate the specific type of standard exception that occurred.

Exception: IluProtocolError

An exception that may be returned from the ILU runtime. This exception is raised for all on-the-wire exceptions, with a value that indicates which kind of protocol exception occurred.

Exception: IluUnimplementedMethodError

An exception that may be returned from the ILU runtime. Raised when an unimplemented method is called, typically on a true instance.

Exception: IluUnknownTypeIDError

An exception that may be raised from the ILU runtime. It indicates that the associated type ID value is unknown in this address space.

Function: IOROfObject (obj)

If the IIOP protocol has been configured in, returns the string IOR of the object, as specified in the CORBA 2 IIOP specification. If the IIOP protocol has not been configured in, throws an error.

Function: LongReal (v)

Converts its int, float, or sixteen-integer list or tuple argument to type ilu_LongReal. In case of a list or tuple, the elements encode the bytes of the IEEE long real value, from most significant to least.

Function: LookupObject (sid, ih, cl)

Returns the object with object server ID sid, object instance handle ih, and Python class cl, assuming it was previously published using the simple binding service. If the lookup fails, None is returned.

Function: ObjectOfSBH (cl, sbh)

Returns the object corresponding to the Python class cl and string binding handle sbh.

Function: ParseSBH (sbh)

Returns the pair (object id, contact info) corresponding to the string binding handle sbh.

Function: RegisterCustomSurrogate (class)

Registers class as the object type to create when receiving a surrogate of the type indicated by the _IluClass field of class. class must be a subtype of the default surrogate type for this ILU type. This allows custom surrogates, with implications for caching and other object-type-specific functions.

Function: RegisterInputHandler (file, handler_fn)

Sets up an association between the file (which must be a file object opened for reading), and the handler_fn (which must be a callable function with no arguments) so that handler_fn is called whenever input is available on file. This is useful for implementing a server that also responds to commands typed to its standard input, for example. Passing a value of None for the handler_fn removes the association.

Function: RunMainLoop (loophandle)

Runs the ILU main loop. The argument loophandle is a "handle" on that loop invocation, created by a call to ilu.CreateLoopHandle().

Function: SetCalloutExceptionHandler (handler-fn)

This function can be used to define a function handler-fn which is called when an internal Python exception is signalled in code called from the ILU C code. The handler function receives four arguments: a string indicating where in the ILU runtime the exception was encountered, the exception type, the exception value, and a traceback object. This function is typically used to note the exception to a file or stderr; see the example usage in `ILUSRC/runtime/python/iluRt.py'. If a parameter of None is passed to SetCalloutExceptionHandler, it cancels any handler function in use, and a default built-in one is used.

Function: SetDebugLevel (flags-or-switches)

Sets the ILU kernel debugging flags according to its int argument, if an int is specified, or via the colon-separated list of debug switches, if a string is specified. See the Debugging section of the ILU Manual for more information on these switches.

Function: SetMainLoop (DoEvent, RegisterInput, CancelInput, RegisterOutput, CancelOutput, CreateAlarm, SetAlarm, CancelAlarm)

The purpose of this function is to be able to use a foreign main loop (such as for a user interface toolkit) with an ILU server. The details will not be described here. Look at the runtime module ilu_tk for an example of its use.

Function: SetPassport (passport)

Sets the current passport identity for this thread, and returns the passport active before this call. Either of these can be None. Also see the function CreatePassport, and the function GetPassport.

Function: SetPipeline (pipeline)

Sets the current pipelining context for this thread, and returns the context active before this call. Either of these can be None. Also see the function CreatePipeline, and the function GetPipeline.

Function: SetSerializer (serializer)

Sets the current serialization context for this thread, and returns the context active before this call. Either of these can be None. Also see the createSerializer method on the class ilu_Server, and the function GetSerializer.

Function: ThreadedOperation ()

Enables thread use in both the ILU kernel and the ILU/Python runtime. This routine should be called before any other ILU calls are made.

Constant: TRUE

A value which evaluates to Python boolean True.

Function: TypeID (cl)

Returns the ILU unique type identifier corresponding to the Python class cl.

Function: TypeName (cl)

Returns the ILU type name corresponding to the Python class cl.

Constant: Version

The ILU version string.

Identifiers Exported from the `CORBA` Module

Variable: InitialReferences

A dictionary with string keys, and values of type CORBA.Object. It is used to resolve strings passed as parameters to CORBA.ORB.resolve_initial_references(). The following names are supported automatically by Python runtime:

NameService
If the environment variable ILU_COS_NAMING_IOR is bound to a string IOR for a OMG IDL CosNaming::NamingContext object instance, the Python runtime will attempt to create a surrogate for that instance locally, ping it, and if successful will bind it to the string "NameService".

Exception: InvalidName

Raised when an invalid name is passed to CORBA.ORB.resolve_initial_references(). Has the associated bad name as its value.

Class: Object (ilu.IluObjSurr)

A type which all object types defined in OMG IDL, or inheriting from ilu.CORBA-Object in ISL, participate in. It supports the following methods:

_is_a(type_uid) - returns True if the object is of the specified type, False otherwise; raises ilu.IluUnknownTypeIDError if the type_uid is unknown in this address space;
_is_nil() - returns False; raises TypeError if called via CORBA.Object._is_nil() on a non-Python-object type;
_non_existent() - returns the logical inverse of the result of calling ilu.PingObject() on the object;
_is_equivalent(other) - returns the result of comparing self and other with the Python == operator;
_duplicate() - does nothing, returns self;
_release() - does nothing, returns nothing;
_hash(max_value) - returns (hash(self) % (max_value + 1));
_get_implementation() - raises IluUnimplementedMethodError;
_get_interface() - raises IluUnimplementedMethodError;

The CORBA.Object class is actually implemented in iluRt.CORBA_Object, so all classes which inherit from ilu.CORBA_Object will have access to these methods.

Class: ORB

The general class for manipulating the object request broker. There is typically only one instance of this class per address space. It is retrieved with the function CORBA.ORB_init(); it supports the following methods:

object_to_string(instance) - returns a string which can be used in a subsequent string_to_object() call;
string_to_object(string) - if the specified string is well formed and specifies an object, the object is created locally and a reference is returned; the reference may be to a true instance if the string names a true instance; if the string is poorly formed, the Python exception ilu.IluGeneralError is raised. This method does not test for the existence of the instance.
resolve_initial_references(string) - If the string argument is bound in the dictionary CORBA.InitialReferences, the value is returned. Otherwise, the exception CORBA.InvalidName is raised. See the documentation of CORBA.InitialReferences for a listing of the names that are bound automatically, if any.

Function: ORB_init (argv=(), orb_id='ilu')

Returns an instance of CORBA.ORB with the specified orb_id (currently only the ORB ID 'ilu' is supported). The arguments which may be passed in via argv are ignored.

Methods and Attributes of ILU Objects

IluObjectID() returns the object ID of the object.
IluPublish() publishes the object using the simple binding service.
IluSBH() returns the object's string binding handle.
IluTypeID() returns the unique type identifier of the object's ILU type.
IluTypeName() returns the type name of the object's ILU type.
IluWithdraw() undoes the effect of IluPublish().

Special attributes of ILU true objects: One or more of the following attributes may be set in a true (implementation) object of an ISL object type to control certain aspects of that object.

IluInstHandle, a string instance variable, gives the object's instance handle. If not present, an instance handle is invented automatically.
IluServer, a variable of type ilu_Server, determines the object's server. This can be an instance or a class variable. If not present, the default server is used.

Go to the previous, next section.